Wine Tanks – Custom made or a selection of Standard Designs – *Price in USD*

$6,750

Beautifully made custom wine tanks made to the highest standard.

Valves, custom fittings, hose-tails, and accessories.

Don’t settle for lightweight, paper thin, flimsy cheap Stainless imports!

Our tanks are built tough with lifetime use in mind.

We implement Q.C. standards beyond those typically seen in the wine industry.

Our response and design times are market leading.

Tanks from 200L – 34,000L.

Double skin stainless with insulation an option providing a superior finish and performance to Aluminum clad tanks and at a lower price!

We will not be beaten on a $/L price by any other supplier in Australia

The example of design criteria for our 5,300L Fermentors / VC tanks:
• No penetrations are above the height of the door:
o A common frustration with VC tanks is when thermowells are placed halfway up the tank wall limiting the minimum volume which can be stored in the tank.
• The racking valve and bottom valve are offset:
o This is to encourage flow around the tank when mixing valve to valve
• Racking Arm
o The tanks pictured are optioned with a racking arm. Due to the door position of a fermenter racking needs to be done from over the top. The racking arm and a sight glass make racking more user friendly.
• 3” Bottom valve sump offset to the door
o Whilst totally normal on larger storage tanks on 3” valves on small VC tanks are not found. When draining a ferment this will clearly be an advantage. It could also allow filling of must via the bottom valve
o When used to store clean wine all wine should be able to be drained from the valve and avoid the annoying last bucket having to be drained out the door.
• Large surface area cooling plate in the critical zone
o Versatility of volumes which can be warmed and cooled.
• High clearance to the crane arm
o Approximately 1m to the crane arm allowing the lid to be hoisted well clear of the tank when working red ferments